Bio-rad ChromLab™ Software Bedienungsanleitung PDF herunterladen (Seite 102)

5 | Plumbing and Priming the NGC Chromatography Systems

100 | NGC Chromatography Systems and ChromLab Software

Plumbing All NGC Systems

Table 8 lists the tasks for plumbing all NGC systems. The tasks are explained in

detail in the sections that follow.

Inlet tubing to the pump head wash port on system pump A

Pump head wash priming line

to the pump head wash port on

system pump B

1/4-28 union to the priming line on system pump B

Pump head wash inlet to the 1/4-28 union attached to the pump head

wash priming line on system pump B

On the sample inject valve:

 Sample loop

 Injection port

 Waste lines (2)

Tube #2 from the outlet on the conductivity flow cell to the inlet on the

40 psi backpressure regulator

Plumbing the System Pumps Wash Lines

All configurations ship with the pump wash system preplumbed except for the inlet

and outlet tubing for the pump head wash. Plumbing the inlet and outlet tubing is

specific to the type of pump (system pump configuration or sample pump). The

following images show a detailed view of the connectivity and flow direction of the

rinse solution through the tubing segments for the system pumps and the sample

pump.

Table 8. Plumbing tasks for all NGC systems

Task

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 177 178

Keine Kommentare

Bio-rad ChromLab™ Software Bedienungsanleitung Seite 102