Bio-rad S3™ Cell Sorter Bedienungsanleitung Seite 85
- Seite / 132
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Instruction Manual | 75
7.5 Instrument Status Box
The cleaning protocol will be completed when the window disappears. If a high pressure
cleaning has been chosen, run a QC using ProLine
™
calibration beads before sorting.
7.5 Instrument Status Box
The instrument status box is located at the bottom of the instrument control panel. The
notification and the color of the box will change depending on the state of the instrument. Table
26 describes the notifications and colors.
Table 26. Instrument Status Box notifications and colors.
Color Notification Action Example
Gray Off Nothing Off
Green Ready Can begin acquisition or sort Acquiring sorting
Yellow Information Perform requested action Require QC
before proceeding Fluids Low/High
Orange Warning Nothing, system is running Calibrating
Red Error Perform required maintenance Not maintaining droplets
7.6 Status Bar
The status bar is located at the bottom of the ProSort Software window with nine status
indicators (Figure 82). Table 27 describes the status indicators.
Table 27. Description of each status indicator.
Number Description
1 Software connectivity to instrument
2 Current date
3 Temperature control status
4 Event rate (events per second)
5 Total event number
6 Acquisition time elapsed
7 Sort time elapsed
8 Current user
Fig. 82. Status bar with the status indicators numbered.
Fig. 81. Cleaning protocol final stage.
- Cell Sorters 1
- Legal Notices 3
- Bio-Rad Technical Support 3
- Safety Warning Labels 5
- Instrument Warning Labels 5
- Regulatory Compliance 6
- Biohazards 6
- Table of Contents 9
- Introduction 11
- 1.1 System Components 12
- 1.2 Installation Requirements 12
- Hardware Description 13
- 2.1.1 Instrument Back Panel 14
- 2.1.2 Aerosol Evacuation Port 14
- 2.2 Fluidics System 15
- 2.2.2 Loading Stage 16
- Instruction Manual 17
- 2.2.3 Nozzle 18
- 2.2.4 Sort Collection Chamber 18
- 2.3 Optics 19
- 2.4 Electronics 21
- Software 23
- 3.1 Main Software Window 24
- 3.1.1 Title Bar Buttons 25
- 3.1.2 File Menu 25
- 3.1.3 Home Tab Toolbar 26
- 3.2 Control Panel 30
- 3.3 Administrator Tab Toolbar 32
- 3.3.1 Editing QC Criteria 33
- 3.3.2 Edit Droplets 34
- 3.3.3 Edit Streams 34
- Instruction Manual 35
- Test Pattern highlighted 35
- 3.3.4 User Reports 36
- 3.3.5 Managing Users 37
- 3.3.6 Decontaminate 38
- 3.3.8 Global Preferences 39
- Boost Adjustment 40
- Force Cleaning 40
- Default Plot Statistics 40
- Plot Defaults 40
- Parameter Names 41
- Default Save Location 41
- Emergency Contact Information 41
- Getting Started 43
- 4.2 Logging In 44
- 4.3 Daily Startup 45
- 4.4 Quality Control 46
- 4.4.1 Droplet Setup 47
- 4.4.2 Side Streams 48
- 4.4.3 Alignment 49
- 4.4.5 Drop Delay Maintenance 50
- 4.4.6 Recalculate Drop Delay 51
- 4.4.7 QC Criteria 51
- 4.4.8 QC Report 51
- 4.5 Protocols and Workspace 52
- 4.5.3 Saving Protocols 53
- 4.5.5 Opening FCS Files 54
- 4.5.6 Saving FCS Files 55
- 4.5.10 Changing Parameters 56
- 4.5.11 Viewing Statistics 57
- 4.5.13 Creating Regions 58
- 4.5.14 Creating Gates 59
- Acquisition 61
- 5.1.1 Target Event Rate 62
- 5.1.2 Event Limit 63
- 5.1.3 Cycle Mode 63
- 5.1.4 Trigger 63
- 5.1.7 Auto Save 64
- 5.1.5 Threshold 64
- 5.1.6 PMT Voltages 64
- 5.2 Compensation 65
- Instruction Manual 67
- Fig. 61. Compensation matrix 67
- 5.2.2 Manual Compensation 69
- 5.3.1 Hot Swap 70
- Instruction Manual 71
- 5.4 Optical Filters 72
- 5.4.2 Optical Filter Blocks 73
- 6.1 Sort Setup 75
- Fig. 70. Sort Logic window 76
- 6.1.1 Sort Collection 77
- 6.1.2 Volume Tracker 77
- 6.1.3 Setting Regions to Sort 78
- 6.2 Sort Modes 79
- 6.3 Sort Statistics 79
- 6.4 Sort Plots 81
- Additional Software Features 83
- 7.4 Clean System 84
- 7.5 Instrument Status Box 85
- 7.6 Status Bar 85
- 7.8 Quality Control Reports 86
- 7.7 Printing 86
- 7.9 User Reports 87
- 7.10 Biosafety System 88
- Shutdown 89
- Instruction Manual 91
- 8.1 Daily Shutdown 91
- Automatic Startup 93
- 10.2 Dealing with Clogs 98
- Maintenance 100
- 10.4 Swap Nozzle Tip Wizard 101
- Instruction Manual 101
- Instruction Manual 103
- Instruction Manual 105
- Cleaning the nozzle tip: 108
- Sonication: 108
- Syringe wash: 108
- Instruction Manual 109
- Instruction Manual 111
- Instruction Manual 113
- 10.5 Optical Filter Cleaning 115
- 10.6 Disinfectants 115
- 10.7 Decontamination 115
- Instruction Manual 119
- Troubleshooting 121
- References 125
- and S3e 127
- Cell Sorter 127
- Specifications 127
- Ordering Information 129
- Life Science 132
- Bio-Rad 132
- Laboratories, Inc 132
Verwandte Produkte und Handbücher für Messgeräte Bio-rad S3™ Cell Sorter
Messgeräte Bio-rad Model 550, Ultramark, and Benchmark Microplate Rea Bedienungsanleitung
(39 Seiten)
(39 Seiten)
Messgeräte Bio-rad Model 550, Ultramark, and Benchmark Microplate Rea Bedienungsanleitung
(15 Seiten)
(15 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.062 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern